Temperature Cold Sensitive Adhesive Vinyl Sheet
Temperature Cold Sensitive Craft Vinyl is a new permanent vinyl developed with high technology,when the temperature is below 15°C /F59, it will turn into a completely different color.
Cold sensitive adhesive vinyl is a type of color changing vinyl material commonly used in the printing industry to create graphics, decals, and signage. The adhesive on this vinyl is designed to activate and bond with the substrate at low temperatures, when the temperature is below 15°C /F59, it will turn into a completely different color, and when the temperature rise, the color can change back to the original color.
However, extreme cold temperatures can affect the performance of cold sensitive adhesive vinyl. At temperatures below freezing, the adhesive can become brittle and lose its ability to bond effectively, leading to issues such as peeling and curling. Therefore, it is important to store and apply cold sensitive adhesive vinyl at temperatures within the recommended range to ensure optimal performance and longevity.
It is also worth noting that the application of cold sensitive adhesive vinyl in cold weather conditions can be challenging, as the vinyl may not adhere properly to the substrate due to the reduced effectiveness of the adhesive. Therefore, it is recommended to apply cold sensitive adhesive vinyl in a controlled environment with a stable temperature to ensure a successful application.
Specificaltion
|
Surface material |
PET+PVC face film |
|
Release Paper |
PE-Coated Silicon Wood-Pulp Paper |
|
Glue Type |
Pressure-Sensitive |
|
Glue Content |
Solvent Polyacrylate |
|
Glue Thickness |
0.024± 0.002MM |
|
Glue Color |
Transparent |
|
Film thickness(With Glue) |
0.274± 0.02MM |
|
Color |
12 colors |
|
Available sizes |
12x12inch |
|
Waterproof |
Yes |
|
Cutting plotter |
Yes |
|
Removability |
Removable With Heat |
|
Stretchability |
Stretchable With Heat |
|
Durability |
Outdoor 3 years, Indoor 6 years |
|
Brand |
Yesion Brand |
|
ODM /OEM |
Yes |
Operation and Video
STEP 1: Clean Your Surface
The first thing you will want to do is make sure the surface that you are planning on applying the craft vinyl to is clean and dry. The smoother your surface the easier it will be to transfer your vinyl onto, but rougher surfaces like wood, textured walls, etc. will still work.
Step 2: Cut Your Design
You can cut your design by hand or use a craft cutter. After your design is all cut, remove the excess vinyl from around your image/lettering (this is called weeding).
Step 3: Apply Your Transfer Tape
Simply place your transfer tape over your vinyl, then take something flat and hard (i.e. credit card, scraper, application tool, etc.) to smooth out any bubbles and to make sure it is securely fastened to the vinyl. Next you will carefully pull off the backing paper from the vinyl being careful to make sure that the vinyl has transferred to your tape.
Step 4: Adhere Your Design
Carefully position it onto your project; once you have it in place, firmly press down and use your scraper to smooth out any bubbles. Always make sure to start from the center and work out towards the edges, this will press out any bubbles instead of pushing them in. Once you have your vinyl securely adhered to your surface, take one corner of your transfer tape and slowly pull downwards at an angle. Run your scraper/application tool (credit card, etc.) over the vinyl once applied to get out any remaining bubbles and help secure it to the surface.
Application
Temperature cold sensitive craft vinyl bundles are suitable for a wide range of applications including graphics industry, signs, home decor, glass, mirror, ceramic, tiles, cars, letters, banners, striping, decals, picture frames, scrapbooking and more.
