Tattoo Paper Silver Color For Inkjet Printer
Tattoo paper is a special type of paper that allows you to create temporary tattoos at home using an inkjet printer.
Specificaltions
Size |
A4 / A3 |
Transfer type |
water transfer |
Suitable printer |
inkjet printer |
Suitable ink |
pigment ink/dye ink (pigment ink is more recommended) |
A printable paper thickness |
0.23 mm |
B film thickness |
0.17 mm (clear film 0.08 mm+silver glue 0.02 mm+back film 0.07 mm) |
Opertation and Video
Easy to use
1. Print the image with inkjet printer in mirror mode.
2.Blow the printed A paper with a hair dryer for 3-5 minutes until the ink is dry.
3. Attach B film to A paper.
4. Use a scraper to scrape out the air bubbles.
5. Remove the clear film.
6. Attach the image on the skin, wet and press.
7. Slide out the back film.
Note:
1. Mirror Printing
2. The image is recommended to use hollow designs for better effect.
3. Ink selection: It is recommended to choose waterproof ink for printing.
4. It takes about 2~3 hours to dry naturally after printing, which is rather long. Drying with a hairdryer is recommended.
5. Make sure the skin is dry and clean before transferring .
6. Press and wet 30~40 seconds when transferring large-format patterns, and then remove the backing film.
7. Avoid friction with clothing or accessories for 30 minutes after transferring.
8. The glue feeling will get weaker and weaker after a few hours.
How to use Printable Temporary Tattoo Paper Silver Color For Inkjet Printer
Application
The Printable Temporary Tattoo Paper Silver Color For Inkjet Printer is suitable for DIY tattoos on skin.